
Egypt Lake-Leto Cabinet Refacing
Crown Molding Addition in Egypt Lake-Leto, FL
Crown molding addition in Egypt Lake-Leto, FL for cabinet tops. Finish-matched molding, cut and installed. Free estimates available.
- 15+ Years local experience
- 500+ Projects completed
- Licensed & Insured
Serving Egypt Lake-Leto and nearby communities.
A lot of kitchens in older Egypt Lake-Leto homes were built without crown molding above the cabinets, leaving a gap between the cabinet top and ceiling. Crown molding addition closes that gap with finished molding cut and fitted to match the existing or newly refaced cabinetry. Egypt Lake-Leto Cabinet Refacing handles this as a standalone finishing touch or paired with a full reface.
Ceilings in older homes aren't always perfectly level, which makes scribing molding correctly trickier than it looks. Getting a clean, gap-free fit at the ceiling line takes measuring each run individually rather than assuming one angle fits the whole kitchen.
What's included
What's Included with Crown Molding Addition
Typically included: measuring cabinet runs and ceiling gaps, molding profile selection, cutting and fitting, finish match to cabinet color, install.
Optional: corner molding blocks at complex angles.
Customer prep: clear countertops below the work area for ladder access.
Want a clearer scope?
Get a Free EstimateHow it works
How Our Crown Molding Addition Process Works
Step 1Space Measurement
Measuring cabinet tops and ceiling angles to plan molding length and cuts.
Step 2Molding Style Selection
Choosing a profile that complements the cabinet design.
Step 3Cutting and Fitting
Cutting pieces to precise angles for proper corner fits.
Step 4Surface Preparation
Prepping cabinet tops for secure molding attachment.
Step 5Molding Installation
Attaching and securing molding along cabinet runs.
Step 6Finish Touch-Ups
Blending seams and edges to match existing cabinetry.
Materials
Materials and Methods for Crown Molding Addition

Crown Molding Profiles
A range of profiles to add detail above cabinetry, chosen to suit the kitchen's existing or new style.

Wood Molding Strips
A traditional, durable choice that holds paint or stain well over time.

Molding Adhesive
Keeps molding firmly bonded to cabinet tops, important in a region with humidity swings that can loosen weaker adhesives.

Finish Nails
Adds mechanical support alongside adhesive for a secure, long-term hold.

Matching Stain or Paint
Finish is matched to existing cabinetry so the molding looks original rather than added on.

Corner Molding Blocks
Simplifies fitting at tricky angles common in older homes with uneven cabinet layouts.
Questions on materials?
Get a Free EstimateTimeline
How Long Does a Crown Molding Addition Take?
This is typically a short add-on job.
- 01
Measure
same day - 02
Molding cutting and prep
2–3 days - 03
Install
same dayas a reface, or a standalone half-day visit.
Need a schedule that fits?
Get a Free EstimateCost
What Does a Crown Molding Addition Cost in Egypt Lake-Leto?
Priced by linear foot, with pricing lower when bundled into a full reface job. Call for a free estimate.
| Project type | Typical range | What’s included |
|---|---|---|
| Standalone molding on existing cabinets | $12-$25 | per linear foot, includes cutting, finish match, and install. |
| Molding paired with a full reface | $8-$18 | per linear foot, bundled add-on pricing. |
| Complex angles or corner blocks | $150-$400 | Add depending on kitchen layout. |
These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.
Want a number for your home?
Get a Free EstimateCodes & permits
Permits and Codes for Crown Molding Addition
Molding addition is purely cosmetic trim work and doesn't typically require Hillsborough County permitting.
| Typically needs a permit | Often no permit |
|---|---|
| — | Scribing molding to an uneven ceiling without visible gaps |
| — | Cutting precise corner angles on complex cabinet layouts |
| — | Matching finish exactly to existing or newly refaced cabinetry |
Need help with permits?
Get a Free EstimateWhen to call
When to Call for Crown Molding Addition
Call (727) 485-0565 for a free estimate on crown molding.
- Cabinets stop short of the ceiling with a visible open gap.
- You've just finished a reface and want a completed, finished look.
- Existing molding is damaged or mismatched to updated cabinetry.
Seeing warning signs?
Get a Free EstimateFAQs
Crown Molding Addition FAQs
Does crown molding addition work on original cabinets, not just refaced ones?
Molding can be added to existing original cabinetry as a standalone finishing touch, no refacing required first.
How much does crown molding addition cost?
Standalone jobs typically run $12 to $25 per linear foot. Bundled with a full reface, pricing drops to $8 to $18 per linear foot.
Can molding be matched to an existing cabinet finish?
Molding is stained or painted to match the current or newly refaced cabinet color before install.
What happens if my ceiling isn't level?
Molding gets scribed individually to each cabinet run rather than cut to one standard angle, which accounts for ceiling variation common in older homes.
Is DIY crown molding installation realistic?
A simple straight run on a level ceiling is doable for a confident DIYer. Uneven ceilings and complex corner angles are where most DIY installs end up with visible gaps.
More services
Other Cabinet Refacing services

Cabinet Refacing
Cabinet refacing in Egypt Lake-Leto: new doors, veneer, and hardware over your existing boxes. Free estimates, written quotes.

Kitchen Cabinet Refacing
Kitchen cabinet refacing in Egypt Lake-Leto, FL. New doors, finishes, and hardware on your existing boxes, with free estimates and honest cost ranges.

Bathroom Vanity Refacing
Bathroom vanity refacing in Egypt Lake-Leto, FL. New doors, moisture-resistant finishes, and hardware. Free estimates, no gutting required.
Ask about Crown Molding Addition
Tell us about the project and how to reach you.