Egypt Lake-Leto Cabinet Refacing logoEgypt Lake-Leto Cabinet RefacingEgypt Lake-Leto, FL
Menu
bathroom vanity refacing in Egypt Lake-Leto, FL

Egypt Lake-Leto Cabinet Refacing

Bathroom Vanity Refacing in Egypt Lake-Leto, FL

Bathroom vanity refacing in Egypt Lake-Leto, FL. New doors, moisture-resistant finishes, and hardware. Free estimates, no gutting required.

  • 15+ Years local experience
  • 500+ Projects completed
  • Licensed & Insured

Serving Egypt Lake-Leto and nearby communities.

Bathroom vanities take more of a beating than kitchen cabinets. Steam from showers, splashed water at the sink, and daily humidity swings wear down laminate and loosen doors faster than anywhere else in the house. Egypt Lake-Leto Cabinet Refacing resurfaces the vanity box, swaps doors and drawer fronts, and reseals everything against moisture instead of ripping the whole unit out.

Most vanities in this part of Hillsborough County still have sound plywood or particleboard boxes under a tired laminate skin. If the box hasn't swelled near the sink base, refacing gets you a new look without touching plumbing or cutting new countertops.

What's included

What's Included with Bathroom Vanity Refacing

Typically included: box inspection for moisture damage, new door and drawer fronts, matched veneer or laminate on exposed surfaces, new hinges and pulls, sealant along seams.

Optional: soft-close hinge upgrade, new vanity top edge trim, interior shelf refinishing.

Customer prep: clear out vanity drawers and cabinet contents, remove toiletries from the countertop before the crew arrives.

How it works

How Our Bathroom Vanity Refacing Process Works

  1. Vanity Inspection photo
    Step 1

    Vanity Inspection

    Checking the box and base for soft spots or swelling near the sink before quoting.

  2. Finish Selection photo
    Step 2

    Finish Selection

    Picking moisture-resistant laminate or sealed veneer samples on site.

  3. Surface Resurfacing photo
    Step 3

    Surface Resurfacing

    Applying new veneer or laminate skin to the vanity's exposed faces.

  4. Door and Drawer Replacement photo
    Step 4

    Door and Drawer Replacement

    Fitting new fronts sized to the existing openings.

  5. Sealant Application photo
    Step 5

    Sealant Application

    Running sealant along seams and the sink cutout edge.

  6. Final Inspection photo
    Step 6

    Final Inspection

    Checking fit, finish, and that doors close without rubbing.

Materials

Materials and Methods for Bathroom Vanity Refacing

  • Moisture-Resistant Laminate photo

    Moisture-Resistant Laminate

    Holds up better than standard kitchen laminate in a room with daily steam exposure and splashing at the sink edge.

  • Water-Sealed Veneer photo

    Water-Sealed Veneer

    Sealed wood veneer resists the swelling that plain veneer suffers from near a humid Tampa Bay bathroom.

  • Vanity Door Panels photo

    Vanity Door Panels

    Cut to fit both standard builder-grade openings and the slightly odd sizes found in older area homes.

  • Corrosion-Resistant Hardware photo

    Corrosion-Resistant Hardware

    Hinges and pulls that don't pit or green up the way older brass hardware does in humid bathrooms.

  • Caulk and Sealant photo

    Caulk and Sealant

    Applied at seams and the sink cutout so water doesn't creep behind the new surface.

  • Soft-Close Vanity Hinges photo

    Soft-Close Vanity Hinges

    Keeps doors from slamming shut in a tight bathroom space with little clearance.

Timeline

How Long Does a Bathroom Vanity Refacing Take?

Vanity jobs move faster than full kitchens since there's usually one unit and a few doors involved.

  1. 01

    Assessment and measure

    same day
  2. 02

    Door fabrication

    1–2 weeks

    built to the vanity's exact openings.

  3. 03

    Install day

    half day

    for most single vanities.

Need a schedule that fits?

Get a Free Estimate

Cost

What Does a Bathroom Vanity Refacing Cost in Egypt Lake-Leto?

Pricing depends on vanity size, whether the sink needs to come off, and material grade. These are honest ranges, not a locked quote, call for a free estimate.

Project typeTypical rangeWhat’s included
Single vanity, doors and drawer fronts only$600-$1,400hardware and veneer skin included.
Double vanity, full refacing$1,400-$2,800covers both sides and shared drawer banks.
Moisture-damage repair plus refacing$1,800-$3,200includes box repair where water got in before new surfaces go on.

These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.

Want a number for your home?

Get a Free Estimate

Codes & permits

Permits and Codes for Bathroom Vanity Refacing

Permit rules run through Hillsborough County building services since Egypt Lake-Leto has no separate city hall. Check with the county before any plumbing work starts.

Typically needs a permitOften no permit
—Sealing around a sink cutout correctly so water doesn't get behind the new surface
—Matching veneer or laminate to a specific finish without visible seams
—Assessing whether the box is actually sound before committing to new materials

When to call

When to Call for Bathroom Vanity Refacing

Call (727) 485-0565 for a free estimate on your vanity.

  • Laminate is peeling or bubbling at the base near the sink.
  • Drawer fronts have swelled or warped from moisture.
  • Hardware is rusting or hinges won't hold the door shut.
  • You want a style update without replacing the countertop or sink.

FAQs

Bathroom Vanity Refacing FAQs

Can a water-damaged vanity still be refaced?

It depends on how deep the damage goes. If it's surface laminate peeling, refacing fixes it. If the particleboard underneath has swollen or gone soft, that section needs repair or replacement before new material goes on, which we check during the free assessment.

How is vanity refacing different from kitchen cabinet refacing?

Same basic method, smaller scope, and the materials lean toward moisture resistance since vanities sit closer to standing water and daily steam than kitchen cabinets.

Does refacing include a new countertop or sink?

No. Vanity refacing covers the cabinet box, doors, drawer fronts, and hardware. Countertop and sink replacement are separate work.

How much does bathroom vanity refacing cost?

Most single vanities run $600 to $1,400 depending on size and material. Double vanities and jobs needing moisture repair cost more. A free estimate gets you an exact number.

Will new hardware fit my existing drawer holes?

Usually yes for standard spacing. If the new pulls use different hole spacing, we drill new holes and fill the old ones as part of the install.

Is DIY vanity refacing realistic for a bathroom?

A hardware swap is doable yourself. Full door and surface replacement around a sink cutout is harder to seal properly without experience, and a bad seal invites water damage down the line.

Ask about Bathroom Vanity Refacing

Tell us about the project and how to reach you.

Call (727) 485-0565