
Egypt Lake-Leto Cabinet Refacing
Commercial Cabinet Refacing in Egypt Lake-Leto, FL
Commercial cabinet refacing in Egypt Lake-Leto for offices, rentals, and break rooms, durable materials, minimal downtime, free estimates.
- 15+ Years local experience
- 500+ Projects completed
- Licensed & Insured
Serving Egypt Lake-Leto and nearby communities.
Commercial Cabinet Refacing covers break rooms, reception desks, rental unit kitchens, and office cabinetry that take more daily wear than a typical home kitchen. Egypt Lake-Leto Cabinet Refacing works around business hours and tenant schedules rather than shutting down a space for a full remodel, matching durable materials to the traffic level of the space.
Many commercial properties in this part of unincorporated Hillsborough County were built out decades ago with cabinetry that's held up structurally but looks dated or shows heavy wear at pulls and edges. Refacing resets the look with commercial-grade surfaces built for repeated use, not just a residential finish stretched past its limits.
What's included
What's Included with Commercial Cabinet Refacing
Typically included: cabinet box assessment, commercial-grade laminate or veneer application, new doors and drawer fronts, reinforced hinges and heavy-duty slides, hardware install, and a final compliance walkthrough.
Optional: antimicrobial surface coating for break rooms and shared kitchens, impact-resistant panel upgrades for high-traffic hallways, after-hours or weekend scheduling.
Customer prep: clearing cabinet contents and countertop items before the crew arrives, and coordinating access with building management or tenants ahead of the scheduled dates.
Want a clearer scope?
Get a Free EstimateHow it works
How Our Commercial Cabinet Refacing Process Works
Step 1Site Evaluation
Commercial spaces are assessed to plan refacing around daily operations.
Step 2Scheduling Coordination
Work is scheduled to minimize disruption to business activities.
Step 3Durable Material Selection
Commercial-grade materials are chosen for high-traffic durability needs.
Step 4Box and Surface Prep
Cabinet boxes are prepared to withstand frequent commercial use.
Step 5Refacing Installation
New surfaces, doors, and hardware are installed across commercial cabinetry.
Step 6Compliance Check
Finished work is reviewed to ensure it meets commercial use standards.
Materials
Materials and Methods for Commercial Cabinet Refacing
Commercial spaces take more abuse than a home kitchen, so the material picks lean toward surfaces built for repeated contact and cleaning, something that matters in Tampa Bay's humid shared spaces where cleaning chemicals and moisture both take a toll.

Commercial-Grade Laminate
Heavy-duty laminate withstands frequent use in commercial environments, holding up to repeated cleaning in break rooms and shared kitchens.

Reinforced Hinges
Reinforced hinges handle increased daily use in commercial settings without loosening over months of heavy traffic.

Impact-Resistant Panels
Panels resist dents and damage common in high-traffic areas like hallways and reception counters.

Heavy-Duty Drawer Slides
Slides support frequent, repeated use in commercial cabinetry without sagging or sticking.

Antimicrobial Surface Coating
Coatings help reduce surface bacteria in commercial applications, useful in shared break rooms and rental unit kitchens.

Commercial Hardware Sets
Durable hardware sets are built for long-term commercial performance under regular handling.
Questions on materials?
Get a Free EstimateTimeline
How Long Does a Commercial Cabinet Refacing Take?
Commercial projects run on a tighter coordination window than home jobs, since the space usually still needs to function around the work.
- 01
Site walkthrough and quote
same day - 02
Material order and fabrication
2–3 weeks - 03
Install
2–5 daysdepending on cabinet count and access hours
Need a schedule that fits?
Get a Free EstimateCost
What Does a Commercial Cabinet Refacing Cost in Egypt Lake-Leto?
Commercial pricing depends on cabinet count, material grade, and whether work happens during or after business hours. These are honest starting ranges, not a locked quote. Call (727) 485-0565 for a free estimate scoped to your property.
| Project type | Typical range | What’s included |
|---|---|---|
| Break room or small office kitchen | $3,000-$7,000 | standard laminate doors and fronts on existing boxes. |
| Reception or retail counter refacing | $2,500-$6,000 | veneer or laminate panels matched to brand finish. |
| Multi-unit rental kitchen package | $6,000-$15,000 | bulk pricing across several units with consistent materials. |
| Full office or facility cabinetry | $10,000-$25,000+ | commercial-grade surfaces and hardware across multiple rooms. |
These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.
Want a number for your home?
Get a Free EstimateCodes & permits
Permits and Codes for Commercial Cabinet Refacing
Commercial projects in unincorporated Hillsborough County follow the same general rule as residential refacing: surface-level work usually clears without a permit, while anything touching plumbing, electrical, or structural elements needs county sign-off. Always confirm with Hillsborough County building services for your specific property type before work begins.
| Typically needs a permit | Often no permit |
|---|---|
| Relocating or adding electrical outlets behind break room cabinetry | Door and drawer front replacement on existing commercial boxes |
| Plumbing changes near a break room sink or coffee station | Laminate or veneer resurfacing of cabinet exteriors |
| Structural changes to cabinet framing tied to the building | Hardware and soft-close upgrades |
| — | Crown molding or trim additions |
Need help with permits?
Get a Free EstimateDIY vs pro
DIY vs Hiring a Pro for Commercial Cabinet Refacing
| DIY | Hire a pro |
|---|---|
| Swapping a single drawer pull or knob in a small office kitchen | Matching consistent finish and hardware across multiple units or rooms |
| Touching up a scuffed cabinet edge with matching paint | Scheduling work around tenant access and business hours without downtime conflicts |
| — | Installing commercial-grade laminate that bonds correctly for heavy daily use |
| — | Coordinating any plumbing or electrical items that need county permits |
Not sure DIY vs pro?
Get a Free EstimateWhen to call
When to Call for Commercial Cabinet Refacing
Call (727) 485-0565 or request a free estimate to get a scope and schedule for your property.
- Cabinetry looks worn or dated across a multi-unit or multi-room commercial property
- You're managing a rental turnover and need consistent, durable finishes on a schedule
- Break room or shared kitchen surfaces show heavy wear from daily use
- You need work scheduled around business hours or tenant access, not a full shutdown
Seeing warning signs?
Get a Free EstimateBefore & after
Before and After Commercial Cabinet Refacing

Before 
After
FAQs
Commercial Cabinet Refacing FAQs
Do you work around business hours?
Scheduling is coordinated with building management or tenants to keep disruption to daily operations as low as possible.
How is commercial refacing different from a residential kitchen job?
The materials are heavier-duty to handle daily traffic and repeated cleaning, and scheduling accounts for occupied spaces rather than an empty home.
Can you handle multiple units or rooms in one project?
Multi-unit rental properties and multi-room offices can be scoped together for consistent materials and bulk pricing.
Do you need a permit for commercial refacing?
Standard surface refacing usually doesn't require a permit, but electrical or plumbing changes near a break room sink route through Hillsborough County building services.
What's the typical cost range?
Costs run from roughly $2,500 for a small counter or kitchenette to $25,000 or more for full-facility cabinetry, depending on scope and material grade.
Is DIY a realistic option for a commercial space?
Small touch-ups are fine, but consistent finish matching and durable hardware across multiple rooms is where a pro protects the investment.
Next step
Get a Commercial Cabinet Refacing Estimate in Egypt Lake-Leto
Call (727) 485-0565 or contact us for a free estimate on your commercial property.
More services
Other Cabinet Refacing services

Cabinet Refacing
Cabinet refacing in Egypt Lake-Leto: new doors, veneer, and hardware over your existing boxes. Free estimates, written quotes.

Kitchen Cabinet Refacing
Kitchen cabinet refacing in Egypt Lake-Leto, FL. New doors, finishes, and hardware on your existing boxes, with free estimates and honest cost ranges.

Bathroom Vanity Refacing
Bathroom vanity refacing in Egypt Lake-Leto, FL. New doors, moisture-resistant finishes, and hardware. Free estimates, no gutting required.
Ask about Commercial Cabinet Refacing
Tell us about the project and how to reach you.